e-stick [roof]

e-stick [roof] is a direct substitute for MGP10 pine ridge, hip and valley beams.

e-stick [roof] is a direct substitute for MGP10 pine ridge, hip and valley beams. e-stick meets and/or exceeds the MGP10 Pine Structural Design Properties prescribed in AS1720.1 – 2010 in all residential and commercial applications.

Features of e-stick [roof]

Application

  • Floors
  • Roofs
  • Walls
  • Formwork

Treatment Level

  • Internal
  • External
  • Max Length 12.6
  • Max DIM 190 x 30 mm

On this page

Overview

E-stick is the only MGP10 pine substitute that is available in long lengths up to 12.6m, removing the need to nail plate shorter lengths together. It is engineered for straightness and is free of the dimensional instability present in nail plated pine. E-stick is available in lengths from 2.4m to 8.4m in 300mm increments; and from 9.0m to 12.6m in 600mm increments. 

Features:

  1. The only MGP10 pine substitute that is available in long lengths – 6.3m+ – without the need to nail plate shorter lengths together
  2. Engineered for straightness, consistency and guaranteed performance
  3. e-stick is treated to a e2S Hazard level in the Wesbeam mill and guaranteed for 25 years against termite attack when used South of the Tropic of Capricorn
  4. e-stick can be easily treated to LOSP H2 and H3 Hazard levels
  5. e-stick can be used in all residential roof framing applications including rafters, hip and valley rafters, continuous and ridge boards
  6. Available ex stock
  7. Competitively priced
  8. Chamfered edges for safer and more comfortable handling
  9. Manufactured from plantation timber veneers
  10. Manufactured in Australia by a wholly owned Australian company
  11. Wesbeam has full Chain of Custody aligned with the Responsible Wood (RW) Certification Scheme and Program for the Endorsement of Forest Certification (PEFC)
Available Sizes

e-stick [roof] size and length availability can be seen below. Please note that e-stick [roof] sizes are only available in Western Australia.

Depth (mm)Thickness (mm)Length Availabilty
140303.6m to 6.0m in increments of 600mm. Longer lengths are available for special order.
170302.4m to 8.4m in increments of 300mm. 8.4m to 12.6m in increments of 600mm.
190303.6m to 6.0m in increments of 600mm. Longer lengths are available for special order.
Installation & Maintenance

General: How to handle and store your Wesbeam Laminated Veneer Lumber products.

  1. Wesbeam Laminated Veneer Lumber should be stored well clear of the ground on level bearers spaced at maximum 1800mm centres
  2. It should be covered to keep dry but still allowing for ventilation
  3. Avoid placing LVL over areas susceptible to ponding.