1. NAME OF BUILDER
2. SITE ADDRESS
3. COMPONENTS TO BE DESIGNED:
A Subfloor
B Floor system – first floor
C Roof rafters*
*LVL rafters only for linear roof systems (i.e. skillion/beam supported); e-joist rafter if accompanied by engineered solution; no full pine rafter designs
4. ARCHITECTURAL PLANS (CAD OR HAND DRAWN) DETAILING ALL OF THE FOLLOWING:
A Title box detailing:
i. Site address
ii. Reference number
iii. Name of company who drafted the plans
iv. Date of plans
B Floor plan – fully dimensioned and with the designed use of each space clearly indicated
C Elevations – minimum of 2
D Cross section – minimum of 1
E Building materials
i. Roof cladding material
ii. Floor coverings
iii. Wall cladding
iv. Etc.
F Wind speed classification
5. ENGINEERING PLANS WHEN AVAILABLE. ENGINEERING DETAILS PROVIDED AT A LATER STAGE WILL AFFECT THE TIMELINE OF THE QUOTE.
6. DEFLECTION CRITERIA:
A As per AS1684
B Alternative requirements – specify
7. MEMBER DESIGN:
A Efficient as possible | not as per engineering
B As per engineering | member design optimised
C As per engineering | using Wesbeam product
8. STEEL BEAMS:
A As per engineering
B Convert to timber where possible
9. WET AREA SET-DOWN:
A No set-down
B Shower only
C Wet areas
10. STATE TYPE OF FLOOR SHEETING WHEN IT IS TO BE PROVIDED BY WESBEAM^
^ Not available in every State/Territory. Contact Wesbeam Sales Representative if unsure.
11. ANY SPECIAL DESIGN CONSIDERATIONS. FOR EXAMPLE: UNUSUAL LOADS, BAL RATINGS, OUTDOOR SPAS, ETC.